Telescope Limiting Magnitude Calculator

How faint can your telescope go?

Telescope limiting magnitude calculator

m=meye+5log⁡10(D/dpupil)m = m_{\text{eye}} + 5\log_{10}(D / d_{\text{pupil}}) — the faintest star your naked eye can see, plus the telescope's light-gathering gain over your eye.

Units
mm
mm
Magnitude 13.6
Naked eye 6.3 + 7.3 mag from the aperture (841× the light of your eye) · Classic rule of thumb for 203 mm: 14.0
7 of 8 test targets below are within reach. Experienced observers using averted vision and high magnification often go about half a magnitude deeper; haze, poor seeing or a dusty mirror take some of that back.
0246810121416limit 13.6naked eyeUranusNeptuneTitanBarnard's StarProxima Centauri3C 273TritonPluto

Brighter to the left, fainter to the right. Filled dots are within reach of this telescope under this sky.

TargetMagnitudeVisible?
Uranus · planet5.7Yes (7.9 mag to spare)
Neptune · planet7.8Yes (5.8 mag to spare)
Titan · Saturn's largest moon8.4Yes (5.2 mag to spare)
Barnard's Star · fastest-moving star in the sky9.5Yes (4.1 mag to spare)
Proxima Centauri · nearest star to the Sun11.1Yes (2.5 mag to spare)
3C 273 · brightest quasar, ~2.4 billion light-years12.9Yes (0.7 mag to spare)
Triton · Neptune's largest moon13.5Yes (0.1 mag to spare)
Pluto · dwarf planet14.4No (0.8 mag too faint)

These limits are for stars and other point-like targets. Galaxies and nebulae spread their light over an area, so one listed at magnitude 12 can still be invisible in this scope. Related: the Exit Pupil Calculator and the Telescope Angular Resolution Calculator.

A telescope’s main job is collecting light, and the limiting magnitude is the simplest way to put a number on how well it does it: the faintest star you can expect to see through it. Each step of one magnitude is a factor of about 2.5 in brightness, so the difference between a magnitude 12 and a magnitude 14 telescope is a factor of six in what reaches your eye.

Light grasp

A telescope collects light over its whole aperture, while your eye collects it through a pupil a few millimetres wide. The ratio is the light grasp:

light grasp=(Ddpupil)2\text{light grasp} = \left(\frac{D}{d_{\text{pupil}}}\right)^2

An 8” (203 mm) scope against a 7 mm pupil collects about 840 times more light than your eye. In magnitudes that’s 5log⁡10(203/7)≈7.35\log_{10}(203/7) \approx 7.3 .

Sky-adjusted limit

Add that gain to the faintest star you can see with the naked eye:

m=meye+5log⁡10(Ddpupil)m = m_{\text{eye}} + 5\log_{10}\left(\frac{D}{d_{\text{pupil}}}\right)

The naked-eye limit, meyem_{\text{eye}} , is where the sky comes in. Under a Bortle 4 rural/suburban sky it’s around 6.3; from a city it may be 4.5 or worse; from a truly dark site, 7.5 or better. Pick your Bortle class from the dropdown, or if you’ve counted stars in a known patch of sky and know your own limit, enter it directly.

The classic rule

Many references give a single formula with no sky term:

m=2.5+5log⁡10(Dmm)m = 2.5 + 5\log_{10}(D_{\text{mm}})

often written as 7.5+5log⁡10(Dcm)7.5 + 5\log_{10}(D_{\text{cm}}) , which is the same thing. It amounts to assuming a naked-eye limit of about 6.7 with a 7 mm pupil, so it fits a reasonably dark sky and overestimates what you’ll see from a town. The calculator shows it for comparison.

Why real limits vary

Both formulas are estimates, and observers routinely beat or fall short of them by a magnitude:

Point sources only

The limit applies to stars and other point-like objects: planets, the moons of Saturn and Neptune, quasars, Pluto. A galaxy listed at magnitude 12 spreads that light over an area of sky, so its surface brightness is far lower and it can be invisible in a telescope whose stellar limit is 13 or 14. For extended objects, a larger exit pupil and a darker sky matter more than the number here; the Exit Pupil Calculator helps with that. For the smallest detail a telescope can resolve rather than the faintest light it can catch, see the Telescope Angular Resolution Calculator.

View source on GitHub

Changelog

  • 2026-11-18Published.